Your garage door opener is one of the hardest working appliances in your home. It is also the largest moving part of your home. As a homeowner, you use your garage door multiple times a day to access your home. So, you want to make sure that it is working perfectly at all times. For this, you must look after your garage door properly and ensure its regular maintenance. With a few care tips, you can keep your garage door opener operating smoothly for many years to come. Let’s check out some simple garage door maintenance tips that every homeowner should keep in mind:
Lubricate moving parts
Just by spending ten minutes every year lubricating the garage door’s moving parts, you can make a huge difference in its operation. Greasing up the moving parts will help it last long and work smoothly. Moreover, it will prevent odd noises and keep the garage door opening and closing properly. You can use a spray lubricant to coat your garage door opener’s chain or drive screw. Do not forget to add some grease to the overhead springs, rollers, hinges, and tracks as well.
Tighten the hardware
It is important to keep the tracks free from dirt and all kinds of debris. So, you must periodically remove the debris and rust from the tracks on both sides of the door. Also, check the brackets that hold the tracks to the wall and ceiling and the fasteners that secure the door opener unit. Over time, the hardware can become loose due to vibration, so it becomes necessary to tighten them at least once a year. Be careful when working with the nuts and bolts lest you may end up causing damage.
Check the balance
If your garage door is not properly balanced, it can put excessive strain on the motor and extra wear and tear. To check the balance, disconnect the opener and try to open and close the door manually. If the door does not remain in one place or move smoothly, you should call your garage door mechanic to have the tension adjusted.
Examine the rollers
The rollers enable your garage door to move smoothly. If the rollers become warped or broken, it can cause friction and vibration. The most obvious signs of bad rollers are misalignment and excessive shaking of the garage door. In case you notice any of these signs, you should thoroughly examine the rollers and ensure that they are tightly secured to the shaft. There should be no room for them to move out of line. If the rollers are worn, you should have them replaced by a professional immediately. No matter how much of a DIY enthusiast you are, do not attempt to replace the rollers on your own. It is a task best left to the professionals.
Schedule regular maintenance of your garage door
The best and easiest way to ensure the smooth operation of your garage door opener is through scheduled preventive maintenance. Even if you try your best to keep your garage door clean, balanced, and lubricated, there is still a chance that you might overlook some problems. Unless you are a trained professional, you cannot understand how the complex system of pulleys, tracks, rollers, and chains works properly and ensures efficient performance. Preventive maintenance by a professional keeps your garage door running smoothly for as long as possible. Get in touch with our team to know about our maintenance plans.
